petert 641 Posted September 17, 2012 What's everyone's current favourite on this topic? I need to buy a new one as the my Innovate LC-1 went silly. It was fine while it was working but it's now putting out 7V continuously from the 0-5V output. I reflashed it once before to revive it but not this time. One thought was to buy locally, thus having support, eg something from Techedge.com.au or M&W. However, I used an NGK AFX Powerdex last week and was very impressed. They're only approx US$250 on ebay. Another thought is the basic Innovate LM-2, approx US$300 on eBay. http://www.ebay.com.au/itm/New-NGK-AFX-Powerdex-Wideband-Air-Fuel-Gauge-Kit-91101-/261076923671?pt=Motors_Car_Truck_Parts_Accessories&hash=item3cc965b517 http://www.ebay.com.au/itm/INNOVATE-LM-2-DIGITAL-AIR-FUEL-RATIO-METER-KIT-3837-/370521234231?pt=Motors_Automotive_Tools&hash=item5644c95b37 Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted September 17, 2012 I've used/fitted a number of AEM widebands now. Had no problems with them except when I dropped a sensor (my own fault). Also they are very competitively priced. I also like that it is a neat system as all the gubbins is contained within the gauge/display. Share this post Link to post Share on other sites
chipstick 382 1 Cars Posted September 17, 2012 I want to fit an AEM wideband. Where do you source yours from Tom? Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted September 17, 2012 I have bought mine from a performance shop in the USA, have family over there so have had them posted there and then picked up and brought back in my suitcase. However they are dirt cheap on UK Ebay now, just looked and £122 gets one to your door. Share this post Link to post Share on other sites
Anthony 1,003 Posted September 17, 2012 I've had success with the Innovate MTX-L - AFAIK it's basically pretty much an LC-1 controller that's integrated into a gauge/display, and is pretty cheap (although not quite as cheap as the AEM equivilent mentioned by Tom above). Share this post Link to post Share on other sites
cybernck 428 1 Cars Posted September 17, 2012 Also take a look at VEMS WBO2 - it's got EGT function as well. Share this post Link to post Share on other sites
feb 47 Posted September 18, 2012 I've used both, the Innovate MTX-L that Anthony mentioned in my 205 and an AEM one in my Subaru. I wasn't aware (until I bought the Innovate) that you are not supposed to have them plugged in the exhaust without supplying them with current (the heat resistor is supposed to protect them from getting damaged) and I was running the AEM one for months without being electrically connected, not sure if this has damaged it or decalibrated it, I stil get around 11 AFR on WOT and 14.7 in closed loop so I assume it is OK. A friend of mine has been using an AEM for 2-3 years now without problems either. Share this post Link to post Share on other sites
Matteo 17 1 Cars Posted September 20, 2012 I have recently bought and fitted a Koso item off Ebay, from UK: http://cgi.ebay.it/w...em=261098207629 Works great, very fast response. Ready to go in less then 60 sec., no calibration needed. Really one of my best 205 related purchase Share this post Link to post Share on other sites