Moulding Clips

[ScoobyJawa 22]

I need to reattach a 3/4 arch trim piece and insert but have no clips at all, this should be enough with a few spares left over to do the job?

 

http://www.ebay.co.uk/itm/251097210143?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

Ta

[Baz 421]

IIRC that's meant to be a kit with enough to do one side of the car.

[ScoobyJawa 22]

Theres not enough of the metal clips for that though? - theres 3 on the rear quarter?

 

I thought this was for one side....(which is overkill for my needs at the mo)

 

http://www.ebay.co.uk/itm/251097212051?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[Miles 331 1 Cars]

You can buy the metal clips by themselves, I use the black capped/barbed one's in all the trim, the older clip behind type are rubbish I think

[Baz 421]

Theres not enough of the metal clips for that though? - theres 3 on the rear quarter?

 

I thought this was for one side....(which is overkill for my needs at the mo)

 

http://www.ebay.co.u...984.m1423.l2648

 

Ahh apologies i was mistaking it for that kit then!

[Slo 283 1 Cars]

Theres not enough of the metal clips for that though? - theres 3 on the rear quarter?

 

I thought this was for one side....(which is overkill for my needs at the mo)

 

http://www.ebay.co.u...984.m1423.l2648

 

That kits only got enough metal clips to fit one door trim too the robbin feckers

[ScoobyJawa 22]

Does seem a bit pricey, anywhere else to get them from? Peugeot still do them?

[Slo 283 1 Cars]

Not the metal clips no i've already been across and asked

[welshpug 1,622]

they do, with a different part number, miles knows it I believe.

[SurGie 54]

699298 9e 27p each http://www.miamistu.co.uk/pug/GB/205N/7/78E10A.HTM

[Slo 283 1 Cars]

wrong one surgie he wants the flat ones that the trim slides under and so do i come to think of it

Edited September 7, 2012 by Slo

[SurGie 54]

Those door metal curvy flat ones yeah ?

 

I have a few spare.

Edited September 7, 2012 by SurGie

[ScoobyJawa 22]

Trouble is I don't just need the clips I need all the fixings for the arch and red strips too hence looking at the kit.....