Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Furio

Replacing Bearings For Rear Trailing Arms On X4

Recommended Posts

Furio

Has anyone here done this?? have the parts, could use som advice.

Share this post


Link to post
Share on other sites
B1ack_Mi16
Has anyone here done this?? have the parts, could use som advice.

 

Start by getting the tube centre out, I just used a hammer and a suitable sized round bar to drive it out.

 

The outer steel sealing piece will probably follow the tube centre out on the side it exits, on the side you're hammering just remove it once the tube has passed it.

 

Outer bearings would come out easy, inner bearing races might be a little harder to get out.

I think I welded something to it and used a slide hammer, can't remember exactly.

 

What parts have you bought, I guess at least new seals and bearings?

Share this post


Link to post
Share on other sites
Furio
Has anyone here done this?? have the parts, could use som advice.

 

What parts have you bought, I guess at least new seals and bearings?

 

If you look at the other topic in here, "T16user" has loaded some pictures. I've basically got all of what's pictured - except for the bolt and plastic cover / insert.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×