Camber Plates

[Mandic 0]

Hi,

 

Has anyone made/sells camber plates for stock suspension. Front end needs some negative camber as it's not set ideally for fast road use.

 

Thanks

 

Ziga

[welshpug 1,622]

and where in the standard Peugeot McPherson strut would such a plate be used?

 

 

 

the only way you can increase the camber is by moving the wishbone balljoint outwards (longer wishbone) or the top of the strut inwards (smaller diameter coil and an eccentric mounting)

 

 

or a custom machined hub carrier.

Edited January 27, 2009 by WELSHPUG

[Mandic 0]

Well yes, that's what I had in mind, some type of eccentric mounting.

[cybernck 400 1 Cars]

just came across this old pic of Matt's old trackday 405 T16:

thought you might be interested in seeing it .

[Mandic 0]

Cheers!

[JeffR 51]

That's a great pic cybernck.

 

Do you know if the LCA were adjustable or only extended?

 

Any more pics of it &/or the car?

 

Thanks

[Mandic 0]

Found them on my HD as well, here u go...

 

 

 

 

 

 

 

 

Cheers

 

Ziga

[JeffR 51]

Wow! That's sensational. Was this an Ecosse project & if so were there ever any articles written about it?

 

It's hard to say from the pics if the lca is adjustable, maybe the stub is wound right in with no thread showing. What type of welding is needed to do that safely & maintain strength?

 

 

 

 

[cybernck 400 1 Cars]

it was an ex-French-police 405 T16, Ecosse put a Trackstar kit on it and it got featured

in one of the mags (with the title "Pigs can fly" ). then they sold the kit to PWRPUG

in Australia (i guess you should remember that one Jeff ) and Matt (from Ecosse) then

track-prepared it (as you can see in these pics). the last i heard about it is that it got

broken for it's engine .

[JeffR 51]

.... they sold the kit to PWRPUG in Australia (i guess you should remember that one Jeff

 

Andreas' car changed hands & finished up in pieces after an accident (I think) with parts sold off. I think PeterT finished up with the throttle bodies, & someone else got the Morettes. I would have loved to have picked up the wheels.

 

Great story about the T16. Any idea what they got the weight down to?

 

 

[cybernck 400 1 Cars]

yeah i know he sold it off (without bodykit iirc?) and then got a kitted 306 XSi or something like that.

 

i should really get back in touch with him, haven't heard from him in AGES!

 

 

for those who don't know, Andreas (aka PWRPUG) had one of the most recognisable 405 Mi16's in the community.

 

he had a tuned engine with throttle bodies, coilovers, 4-pot brakes etc and later put a bodykit on it (used to be silver):

 

 

as i mentioned earlier, this is a bodykit off Matt's old T16.

 

 

i'll try to find out the weight information of the said T16.

[calvinhorse 870]

info on that rear wing/spoiler would be nice too

[JeffR 51]

info on that rear wing/spoiler would be nice too

 

He once told me it was an experimental or development Touring Car wing.

 

 

 

[cybernck 400 1 Cars]

^ yeah, something like that, it was a genuine one either way .

[calvinhorse 870]

yeah thought it was something like that, looks like the peugeot sport car one, i cant find anything similar all tooo narrow!

sorry for the hijacking!!