Upgraded Gearbox Ratios

[petert1345402284 0]

I recently purchased a 4.75:1 cwp, with the intention of fitting to my 205 track car. However, a friend has been trying to convince me to fit it to the Mi16x4, along with a closer set of ratios from a 205.

 

The standard Mi16x4 ratios are this, with a 4.43 cwp and km/h @ 7400

 

1st 3.450:1 53 km/h

2nd 1.850:1 99

3rd 1.280:1 144

4th 0.969:1 190

5th 0.810:1 227

 

The new box would be a combination of Mi16 and 205 ratios with the 4.75 cwp, again @ 7400:

 

1st 2.923:1 56 km/h

2nd 1.850:1 89

3rd 1.360:1 121

4th 1.069:1 154

5th 0.760:1 225

 

Closer and more useable 1st to 4th, with overall 5th almost identical to standard for easy cruising. What do you think?It's a bugger to change it if I don't like it.

[Jer309GTi 3]

If it were me I would go for it. You're keeping the high 5th so you won't loose out there, only thing is will you be a bit busy with the gearstick if they are too close?

[Guest scottcmb]

Looking at the speeds you can get with each gear i can see a big gain in fun driving through a lot of twisty winding roads where fifth gear is never used!!!! especially here in New Zealand!!!.......is the cwp 4.75:1 ratios available to fit a 4bie?

[petert1345402284 0]

is the cwp 4.75:1 ratios available to fit a 4bie?

<{POST_SNAPBACK}>

 

Yep, mine fits. It's the same as any other BE1/BE3 diff.

[KRISKARRERA 2 1 Cars]

I recently purchased a 4.75:1 cwp,

<{POST_SNAPBACK}>

Where did you get that from?

[Guest scottcmb]

Hey Pete, what about the rear diff....do the ratios have to be changed there too???....or is the final out drive to the rear diff governed by the front diff?

Edited January 30, 2007 by scottcmb

[petert1345402284 0]

It's a Quaife cwp. I can't recall, but somewhere in the UK. It was on eBay.

 

Changing the cwp in the gearbox changes everything, as it's before the front/centre and rear diffs. That's why it's so easy!

[Guest scottcmb]

It's a Quaife cwp. I can't recall, but somewhere in the UK. It was on eBay.

 

Changing the cwp in the gearbox changes everything, as it's before the front/centre and rear diffs. That's why it's so easy!

<{POST_SNAPBACK}>

cwp= crown wheel and pinion correct? and also what peugeot gearbox is this out of?

[petert1345402284 0]

cwp= crown wheel and pinion correct? and also what peugeot gearbox is this out of?

<{POST_SNAPBACK}>

 

yes, crown wheel and pinion. It's from a BE1 or BE3.

[DRTDVL1345402287 0]

I've just put my S16 box into my 205 and i love it! SOO much nicer than the 1.6gti box i had in there..