CCollier300571 1 Posted August 7, 2012 Hiii. I wonder if anyone can shed some light on a few things. I own a 89 205GTI 1.9. I have no idea what engine type it is. 1. How do you tell the difference in the types? 2. The exhaust on it is a two piece system with an olive fitting back box. If the system was swapped could the slip on system be fitted (are the hangers in the same place) ? 3. Im looking at a second hand magnex manifold and having a stainless system made to fit it, but are the exhaust ports the same spacing on all 1.9s and 1.6s? I think thats all the issues at the mo. Taaa 1 Share this post Link to post Share on other sites
welshpug 1,737 Posted August 7, 2012 1, look at the system, if the centre section is welded to the middle silencer its a phase 2 system, also the rear box is the olive type fit on later systems as well. 2 yes a complete phase1 system can be fitted to a phase1.5/2, not that you would want to as the phase2 system is slightly larger bore and gives better torque. 3 yes. Share this post Link to post Share on other sites
CCollier300571 1 Posted August 8, 2012 CHEERS. How do you tell the difference in the types of 1.9 engine? I believe there is a couple of different types fitted. Share this post Link to post Share on other sites
bertie_bas 3 Posted August 8, 2012 IIRC there are 2 types.... The difference i seen was one manifold was braced and one wasn't.... Prob to help in stopping them cracking... Share this post Link to post Share on other sites
welshpug 1,737 Posted August 8, 2012 Theres a few types of engine but all the manifolds are the same part numbers throughout, though with many minor modifications like webbing and bracing Share this post Link to post Share on other sites
CCollier300571 1 Posted August 24, 2012 Hello all. Im now looking for a stainless manifold. Has anyone got one for sale or a link to someone who has? Cheers Share this post Link to post Share on other sites
Miles 331 1 Cars Posted August 24, 2012 I will have a complete manifold and system with invoice as well soon, Will be listed in the for sale section and my FB page Just need to remove it from my new car as it's undergoing a full ground up build at somepoint Share this post Link to post Share on other sites
speno 240 2 Cars Posted August 30, 2012 I sold one a couple of weeks ago ( i know this really helps you but if you need anything else im in chesterfield too Share this post Link to post Share on other sites
CCollier300571 1 Posted September 6, 2012 Cheers. Ive now got a stainless manifold and back box, i just need a center section making. Has anyone had much problem removing the 8 nuts from the manifold to head? Are they prone to snapping? What are they like to remove from the head after snapping? Share this post Link to post Share on other sites
Carbs4me 45 Posted September 6, 2012 there quite akward. Ive never had one snap on me, but ive had the stud come out with the bolt still on it in the past. Share this post Link to post Share on other sites
CCollier300571 1 Posted September 7, 2012 That would be a good thing. Ive got new studs to go in if they come out but i wouldnt risk snapping them to put new studs in. Share this post Link to post Share on other sites