boldy205 75 Posted July 2, 2012 Hi, im looking at buying a 406 v6 coupe engine for my 306. Engine is from an R reg (1997) and have heard early ones are the ones to go for, less complicated etc, is this going to be the early engine? Also, hows the way to go about the removal of the ECU to keep it unlocked? Many thanks Matt 1 Share this post Link to post Share on other sites
Jer309GTi 3 Posted July 2, 2012 You've talked yourself into it then! Share this post Link to post Share on other sites
stef205 96 1 Cars Posted July 2, 2012 i think you have the ignition on the 2nd click or running then disconnect the ecu, dont hold me to it tho Share this post Link to post Share on other sites
boldy205 75 Posted July 2, 2012 Not totaly convinced, but have been offered something that might be good! stef205: Thanks for the reply, anyone else have any conformation? Cheers Matt Share this post Link to post Share on other sites
ade 4wd 11 Posted July 3, 2012 A 97 engine is the earlier one, they changed to the newer multiplexed engine in late 2000. The ECU cannot be unlocked by disconnecting it while the ignition is on. A chip inside the ECU needs reprogramming, i can do this for you. Share this post Link to post Share on other sites
Batfink 201 Posted July 3, 2012 If you are going to use aftermarket management its probably worth going for the newer engine as it made more power... Share this post Link to post Share on other sites
Tesstuff 222 Posted July 3, 2012 (edited) A 97 engine is the earlier one, they changed to the newer multiplexed engine in late 2000. Not true Ade, there are three options. D8 , D9 and shall we call it D8 and a half. This is the one to go for. Newer engine without multiplex. If you are going to use aftermarket management its probably worth going for the newer engine as it made more power... Best to go for the D8 and a half Edited July 3, 2012 by Tesstuff Share this post Link to post Share on other sites
ade 4wd 11 Posted July 3, 2012 Tesstuff, Are you saying that a D8 and a half uses the newer ES9J4S engine with MP7.0 managment? Share this post Link to post Share on other sites
Tesstuff 222 Posted July 3, 2012 I am saying that the myth that there are two choices, D8 non multiplex and D9 multiplex is wrong. There was a crossover. Those in the know call it the D8 and a half. What I know for certain is that it is the ES9J4S engine and it is non multiplex. Don't know the ecu used without asking. Share this post Link to post Share on other sites
welshpug 1,737 Posted July 3, 2012 (edited) I have heard this, but never seen it Also dubious as to whether any cars like this exist as Servicebox only show the J4 engine+ecu for the D8, whereas the D9 does list J4 and J4S. so it may be that its the other way round.... Edited July 3, 2012 by welshpug Share this post Link to post Share on other sites
Tesstuff 222 Posted July 3, 2012 No. Seen it and almost bought it. Plus many more there available to buy. Share this post Link to post Share on other sites
boldy205 75 Posted July 3, 2012 Hmmm, insurance company want another £400 on top of my premium on my 306 one for the 406 coupe. Rip off sods. Im nearly 30, and they want the equivalant of £700 a year, for a wanked out 406. Great! Share this post Link to post Share on other sites
welshpug 1,737 Posted July 3, 2012 ideal reasoning to pop the engine in a 306 then Share this post Link to post Share on other sites
boldy205 75 Posted July 3, 2012 Thinking the insurance is going to be high though. Plus after spending 25 mins on hold to the insurance company,im hacked RIGHT OFF at the moment!! Share this post Link to post Share on other sites
StuF215 1 1 Cars Posted July 6, 2012 Hi, im looking at buying a 406 v6 coupe engine for my 306. Engine is from an R reg (1997) and have heard early ones are the ones to go for, less complicated etc, is this going to be the early engine? Also, hows the way to go about the removal of the ECU to keep it unlocked? Many thanks Matt I'm sure you keep the ECU unlocked (at least the early ones) by disconeecting the ecu whilst the engine is running. I've never had to send away any of the ecus iv'e obtained to be unlocked when this method of removal was used. I thought that the crossover via the D8.5 was the esj94 engine but with multiplex loom lol but I could be wrong of course Stu Share this post Link to post Share on other sites