Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
bobspugs

Non Starter

Recommended Posts

bobspugs

Hi over the past few weeks in the evenings i have changed the cylinder head gasket on my k plate 1.9 GTI.

Put everything back in place including a new starter as the old one was clicling on the solenoid but not turning the engine 8x out of 10.

The spasmodic starting/turning of the engine is still there even when i have put the new motor in,run in a new direct earth and when it does turn it still will not fire!.

Fuel in rail at pressure,12 volts on to one side of the injectors, dry plugs!

Any ideas.

Do all models have the tachometric relay thing or is all that done in the Metronic ECU?

BOBPUGS

Share this post


Link to post
Share on other sites
jackherer

Do you have a spark? If you have no fuel being injected and no spark I'd check the crank sensor first.

 

AFAIK Motronic 205s are similar to Mi16s, they don't have a tachymetric relay, instead they have a fuel pump relay and an injector relay.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×