Mi16 Arp Rod Bolts - Where From?

[stuart 31 3 Cars]

I'm just starting to rebuild an mi16 and need to source some ARP rod bolts.

 

Where sells the correct ones cheapest?

 

I got them from QEP when I did the rally car engine but they're no longer trading.

Any recommendations?

 

Cheers

Stu

[petert 554]

Ebay

[wicked 103 3 Cars]

If you buy them from ebay, check if the seller has them in stock.

End of last year I bought a set from ebay and they were on back order at ARP, so most sellers could not ship them directly.

[welshpug 1,626]

i think sandy uses something else but i can't remember which

[dav1 7]

Could you find out Wat he uses welshpug

[welshpug 1,626]

you could just PM him yourself, but he is very very busy

[stuart 31 3 Cars]

Might drop him a pm myself if i can't get hold of ARPs.

There's only 1 seller who has them on eBay but theyre £109 a set...

Spoox motorsport have them listed in their site at £87 so will give them a try first.

 

Thanks for the replies

Stu

[petert 554]

That's very expensive. They're around AUS$100 in Australia. What about these?

 

http://www.ebay.com.au/itm/ARP-Rod-Bolt-Kit-PEUGEOT-205-306-117-6101-/190549600081?pt=Motors_Car_Truck_Parts_Accessories&hash=item2c5da42751

[welshpug 1,626]

feck, 61 dollars postage!

 

works out at £90 odd all in, plus import taxes etc.

[Sandy 189]

I use standard bolts with standard rods and a sensible rev limit. ARP2000s are adequate upgrades, but for serious engines Carrillo/Pankl bolts are far superior and don't get the manufacturing flaws that are sometimes evident in ARP 2000s.

[stuart 31 3 Cars]

The engine I'm building is essentially a stock mi16 but with gti6 inlet, sump, pump etc on standalone management.

It's going in my daily driver but probably will be used on a track at some point so that was the only reason I was going to go for ARPs.

So with a 7200rpm limit the standard bolts will be up to the job?

[boldy205 74]

Tried Shenpar? Very helpfull whenever i have been in contact with them.