TaffyTim 6 Posted March 26, 2012 OK my car has got starting issues again (see previous threads) What im hoping on doing tomorrow is putting a feed in from the battery to a start button/switch to the starter so if it doesnt fire on the turn of the key then i can push a button and get myself moving. Im thinking I'd better fuse this wire to save a vist by my local brigade, what type of fuse should i use? Share this post Link to post Share on other sites
TaffyTim 6 Posted March 28, 2012 Right, ive put the switch in today and its starting every time . . . . Ive been here before. . . .but all being well this may be my new means of starting the pug. i havent fused it yet though as i dont really know what strength fuse to put in there. Would a 100A fuse bee too much, I initially bought a 20A one but im thinking this might blow straight away?? Share this post Link to post Share on other sites
205kenny 7 Posted March 28, 2012 (edited) I use a starter switch and used to use a 20 or 30 amp fuse (can't remember which). It worked fine, only blew once when i accidentally shorted it out. Just used to keep some spare fuses just incase. I'v now change it for a proper kit, which contained a relay (30 or 40 amp). Edited March 28, 2012 by 205kenny Share this post Link to post Share on other sites
Guest Stainpain Posted April 1, 2012 what was your problem mate as i'm having starting issues...My car has been starting normally, and suddenly today i turned the key and its not turning over :/ any suggestions as it seems like you've looked into it? Cheers Share this post Link to post Share on other sites