Dickie 4 Posted February 15, 2012 Wanted to fix my Petrol Cap today as the existing cap has been damaged and the lock is knackered. So I picked up a full lockset from a breakers but quickly realised the two caps have major differences. The one on the right is the cap that fits, the left one is from a CJ. Question is how do I get the working cap to fit. The filler hose itself has a metal collar fitted to it thats attached with 4 screws. I'm thinking the one on the right is an aftermarket item. Any help would be appreciated. Share this post Link to post Share on other sites
sensualt101 31 1 Cars Posted February 15, 2012 (edited) my gti's cap is like the one on the left in your pic above and all 3 of my 205's have had the same type! i havent seen the type on the right before? Edited February 15, 2012 by sensualt101 Share this post Link to post Share on other sites
Dickie 4 Posted February 15, 2012 Thats what I was thinking. I'm working on the car again tomorrow, and I'll investigate under this collar to see if it's a quick fix. Share this post Link to post Share on other sites