Strictly_Derv 34 Posted January 21, 2012 Hi I've noticed after lots of searching there isn't much/any info on putting a FMIC on the engine. I have my old xud7 te engine in my garage with all the bits to allow it to be intercooled so was wandering if anyone would like a guide on this to be added to the guides section? It would make a huge difference to the engine i'm sure as they heatsoak very quickly after a stage one tune. Max. Share this post Link to post Share on other sites
BenC 6 Posted January 21, 2012 As a diesel turbo owner I'd definately be interested! Share this post Link to post Share on other sites
Paul_13 212 1 Cars Posted January 21, 2012 Post it up mate, want to do something similar in my GRD Share this post Link to post Share on other sites
Strictly_Derv 34 Posted January 21, 2012 Ok then. I'll try do it sometime nextweek if I get the time. How do I get it put in the main websit guide section (thats if it turn out a good guide lol) Share this post Link to post Share on other sites
m_attt 31 1 Cars Posted January 21, 2012 yes please bud, would be a laugh to do Share this post Link to post Share on other sites
dave205 19 Posted January 21, 2012 Post away please Share this post Link to post Share on other sites
m_attt 31 1 Cars Posted February 2, 2012 any more on this bud? Share this post Link to post Share on other sites
Strictly_Derv 34 Posted February 2, 2012 I keep meaning to do get round to it but it's been so bloody cold I havn't. Might try tomorrow as the garage is actually tidy Share this post Link to post Share on other sites
ra228 0 Posted February 10, 2012 Hi Max, In case your looking for more inspiration I would greatly appreciate such a guide as well, been cotemplating this for a while fro my STDT, Fair point about the cold though! Cheers, Rob Share this post Link to post Share on other sites