Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
jon.ford

Tran X Diff Oil

Recommended Posts

jon.ford

I have a tran x diff what is the best gearbox / diff oil to use.

Jon

Share this post


Link to post
Share on other sites
matt.f

People say different things,most use normal Pug gear oil because LSD oil doesn't work in the be3 box too well.

Lots of info if you use the search function,should bring up a few threads

Share this post


Link to post
Share on other sites
allanallen

I run my gripper and a tran-x on standard 75w80 gear oil (comma is my favourite flavour). Both are virtually silent and the gear change is silky smooth hot or cold.

If its a new diff or its had any new plates it'll want an oil change after 50 miles or so IMO, the oil gets quite s*itty after running them in.

Share this post


Link to post
Share on other sites
matt.f

Mines got Total bv75/80,had no problems at all.Pretty sure Miles recommended it when I bought it from him in the group buy

Share this post


Link to post
Share on other sites
jon.ford

It's an old diff came fitted to car when I had it, have had box rebuilt the plates where okay it works great. On slow tight Bends it makes horrible noises, I think most most LSD are like that it is in my escort aswell plated zf

Jon

Share this post


Link to post
Share on other sites
Anthony

Worn/tired driveshafts that sounded fine on an open diff can make an absolute racket with a plate diff.

 

Echoing what others have said, run the oil to match the gearbox - so in this case 75W80. My Tran-X has done significant mileage like this and is still fine (and nice and quiet too for that matter thanks to a new, tight set of 'shafts!)

Share this post


Link to post
Share on other sites
jon.ford

Worn/tired driveshafts that sounded fine on an open diff can make an absolute racket with a plate diff.

 

Echoing what others have said, run the oil to match the gearbox - so in this case 75W80. My Tran-X has done significant mileage like this and is still fine (and nice and quiet too for that matter thanks to a new, tight set of 'shafts!)

Funny you have mentioned shafts just fitted new set of 309 shafts ( haven't tried yet) and adjustable arms. The old shafts had only done four events and where gkn.

Jon

Share this post


Link to post
Share on other sites
jon.ford

I run my gripper and a tran-x on standard 75w80 gear oil (comma is my favourite flavour). Both are virtually silent and the gear change is silky smooth hot or cold.

If its a new diff or its had any new plates it'll want an oil change after 50 miles or so IMO, the oil gets quite s*itty after running them in.

How does gripper compare with tran x ?

Share this post


Link to post
Share on other sites
allanallen

How does gripper compare with tran x ?

 

It's difficult to say as there both in very different cars and have different amounts of pre-load. Physically theyre very similar and id imagine if they were set the same in identical cars youd struggle to tell the difference. If I was to get another I'd go with a gripper though as they have more preload settings to play with and cheaper rebuild parts.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×