205 Rallye Fog Light Blanks

[bigsheep 4]

Does anyone know where I can get 205 rallye fog light blanks?

[rallyeash 155]

good luck! scrappy, ebay etc

[allye 530 3 Cars]

indeed very good luck to you! Very occasionally valances come on ebay, just got to look, look real hard

[ash mi16 0]

ive been looking for a set for ages, cant find them anywhere, i saw a set on ebay about 6months ago :/

[Josh_Quant 27]

Didnt know they was hard to get a set i got some on my diesel

[trogboy 17]

Try your main dealer.

 

That's where I bought my last set not too long ago.

[welshpug 1,626]

7401 A6

NFP

GRILLE

LEFT

 

7401 A7

NFP

RIGHT

 

£85 the pair if there is stock.

Edited December 2, 2011 by welshpug

[steve@cornwall 100]

Surely not to difficult to reproduce?

[JoshGti 8]

You could probably make similar easily with some abs or something cut and slotted together, I found my set at the scrappy however

[allye 530 3 Cars]

Surely not to difficult to reproduce?

 

I'm not so sure, they are very strange angle and shape.

[Baz 421]

Yeah i wouldn't want to have to replicate the angles and affixing brackets etc!

[bensonmi 4 2 Cars]

some lower spec s1 106's have similar style things in the bumper instead of driving lights, i always wondered if they could be addapted to fit a 205?

[steve@cornwall 100]

Yeah i wouldn't want to have to replicate the angles and affixing brackets etc!

 

 

Was thinking 2 part plaster mould and some fibreglass paste .......

[welshpug 1,626]

look fairly simple tbh, just need someone to get a pair and mould away.

[custard-rallye 25]

I have 1 spare I could send if somebody wanted to copy it

[trogboy 17]

I think I've got one too. What side have you got?

[JoshGti 8]

My car isn't going on the road for a while so they wont be missed, so have a pair to save getting them from two places if anyone wants to give replicating them a bash, or ill happily take measurements if anyone wants to try replicating them without moulding them, i.e with sheet material.

[custard-rallye 25]

If they get made il deffo take a set

[Henry Yorke 269 3 Cars]

Why not go for some of the Ecosse vents and then you can fit proper ducting to the back

http://www.ecosse-peugeot.co.uk/show_product.asp?id=320

[pug_ham 242 3 Cars]

I don't want them for any brake ducting.

 

g

[Palm_Bay 0 1 Cars]

Sorry to drag up this old thread, but I am currently looking for a set of these grills. There is a set on everyone’s favourite Internet auction site, but £100 seems a bit steep for some plastic. So I've been ringing around a few places and the closest I got in the UK was one grill for £50, there does seem to be a few sets in Europe however.

Anyway I’d love to get some measurements so I can knock up a CAD model, and maybe see what I can do from there, as there does seem to be a demand for these. Whether I can get these made, with the complex angles going on is another matter, but I’m willing to give it a shot.

[Willem_Jacobs 6 1 Cars]

in europe they were in fact fitted to pretty much every base-model produced from '94 to '96 or at least in the netherlands they were... So there are lots of them around on our scrapyards...

[Palm_Bay 0 1 Cars]

Thanks for the info, maybe I'll have to take a trip to the continent then.

[custard-rallye 25]

I have one sitting will look it out

[Robbiedundy 58 4 Cars]

Did anyone get the measurements for these? Quite fancy trying to bodge out a set for my car :L