mang 3 Posted October 6, 2011 If i put a metal under pan under the hole of my 205 do you think i would have to stop it were the exhust is or go straight under it or would it trap to much heat? Im only asking because im thinking or making a race car and it would create less drag under the car i would take it from front bumper to rear bumper. Share this post Link to post Share on other sites
johnnyboy666 195 1 Cars Posted October 6, 2011 have a look at wardys project thread, got loadsa info on undertrays and photos etc too Share this post Link to post Share on other sites
harryskid 193 Posted October 6, 2011 have a look at wardys project thread, got loadsa info on undertrays and photos etc too Good thread that! Share this post Link to post Share on other sites
Cameron 16 Posted October 7, 2011 Yarp. If you're making an undertray then it would also be a good idea to extend it into a splitter. Share this post Link to post Share on other sites
wardy18 33 1 Cars Posted October 7, 2011 For me now its all about Power to weight and unfortunately im just not happy with the weight the full ally undertray and diffuser is adding to the car so im am re-designing the whole thing to include a more minimal centre undertray to just smooth off the section raises slightly under the seats and also minimise the massive diffuser i have at the back. Main upgrade will be to re-produce out of Carbon Fibre to reduce the weight. I beleive it will give you a good advantage as, so ive read or been told, 30% of drag comes from the underside of the car you just need to weigh up Gain against Weight Disadvantage. PM me if you have any questions, only happy to help Share this post Link to post Share on other sites
Cameron 16 Posted October 8, 2011 What you want is some of this.. Honeycomb Panels Share this post Link to post Share on other sites
wardy18 33 1 Cars Posted October 8, 2011 Not at that price I dont Share this post Link to post Share on other sites
mang 3 Posted October 10, 2011 Yarp. If you're making an undertray then it would also be a good idea to extend it into a splitter. yeah thats what i ment i can defo see the benifits of the under pan when you look under the car you can see straight away it would create alot of un needed drag. This well carnt real say much about this (What you want is some of this.. Honeycomb Panels) LOOK at the PRICE my better half would chop my balls off if i brought some of these Share this post Link to post Share on other sites