ORB 227 1 Cars Posted September 19, 2011 The 207 GTi turbo we have in the showroom sits next to my desk, I was looking at it earlier and noticed the rear caliper has a weird disc thing on the back of the top slider. What is it!?!?? Share this post Link to post Share on other sites
Liquid_106 97 1 Cars Posted September 20, 2011 (edited) 443946 SETCOLUMNSCREW - whatever that is Do you not know or is this a test? Edited September 20, 2011 by Liquid_106 Share this post Link to post Share on other sites
welshpug 1,737 Posted September 20, 2011 a better pic would help, from the other side Share this post Link to post Share on other sites
ORB 227 1 Cars Posted September 20, 2011 That would mean getting up from my desk and walking eight paces Share this post Link to post Share on other sites
Mark Greenwood 0 Posted September 20, 2011 (edited) looks like a anti vibration counter attenuator.. like the big rubber noddys on the 206`s adds a mass that vibrates in opposite phase to the caliper slider, cancelling out any vibrations... .................. or it could be something else........... lol........ thats my guess anyway Edited September 20, 2011 by Mark Greenwood Share this post Link to post Share on other sites
Liquid_106 97 1 Cars Posted September 20, 2011 Please can it be known as a Flux Capacitor from now on? Share this post Link to post Share on other sites
Mark Greenwood 0 Posted September 20, 2011 lol,, i like it Share this post Link to post Share on other sites
welshpug 1,737 Posted September 20, 2011 one for the master tech's I think, not worked on 207's! Share this post Link to post Share on other sites
SurGie 54 Posted September 20, 2011 Is it something to do with the abs, traction control, or a simple anti rattle device. It could be some sort of servo device that lets out any air, so a self bleeding caliper ? Share this post Link to post Share on other sites
S@m 156 Posted September 20, 2011 Just asked a PSA consultant technician and his reply was "Oh yeah, i've seen those on C4 Picassos!" "Right, so whats it for?" "f*** knows, just seen them!" So much for bloody consultant technicians! Sam Share this post Link to post Share on other sites
Mark Greenwood 0 Posted September 20, 2011 this has bugged me so much.. i just asked my neighbor if i could look under his 207,, and i am pretty confident it is what i said earlyer.. Share this post Link to post Share on other sites
TT205 42 Posted September 20, 2011 this has bugged me so much.. i just asked my neighbor if i could look under his 207,, and i am pretty confident it is what i said earlyer.. Whats that then - a flux capacitor? Share this post Link to post Share on other sites
Mark Greenwood 0 Posted September 20, 2011 precisely Share this post Link to post Share on other sites
RossD 44 Posted September 26, 2011 (edited) Something to do with the electronic handbrake?! ServiceBox calls it a 'Caliper Shim' so probably something to do with pre-load, or some sort of position setting device for the handbrake I reckon ;-) Edited September 26, 2011 by RossD Share this post Link to post Share on other sites
ORB 227 1 Cars Posted September 26, 2011 Auto hand brake you say??? Share this post Link to post Share on other sites
omega 82 Posted September 26, 2011 Ha look at all that stuff that exposed to the elements that in a few years time will seize/fail/mess up and cause lots of proplems/bills Share this post Link to post Share on other sites
EdCherry 34 1 Cars Posted September 26, 2011 The auto handbrake is a neat idea. My mums old insignia had it, you'd pull up to the junction and when the car became stationary let off the brake. It wouldn't roll as the auto handbrake would hold the vehicles weight until you wanted to move again. Neat touch. Share this post Link to post Share on other sites
ORB 227 1 Cars Posted September 26, 2011 But it has not got one... Share this post Link to post Share on other sites
Cameron 16 Posted September 26, 2011 It's not gonna be a mass damper IMO, they generally have to be a lot larger than that to make any sort of NVH difference, especially to a large component such as the brake assembly. How does it attach to the calliper? Share this post Link to post Share on other sites