bobdylan_55 1 Posted July 2, 2011 Does anybody have a pinout for the dash clocks and gauges etc. Ive managed to loose my loom and so cant use the haynes manual as i dont have wires with numbers on Cheers Share this post Link to post Share on other sites
Cameron 16 Posted July 2, 2011 I do, somewhere.. doubt I'd be able to find it though! What do you need them for? If you have a multimeter it's pretty easy to figure out what does what. Share this post Link to post Share on other sites
Anthony 1,003 Posted July 2, 2011 Instrument cluster article on main website Share this post Link to post Share on other sites
bobdylan_55 1 Posted July 2, 2011 as said, i dont have the connectors or loom, just the clocks, so i cant use a multimeter or a haynes manual etc. Basically i want to make the loom now, and then when i can get ahold of some connectors i can just join them together. I was going to test the loom by just touching each wire onto its respective pin on the clocks, but as i dont know what is what i cant. Share this post Link to post Share on other sites