Warm Up Table Omex

[choco 0]

Hi,

 

Just a quick question...

I had my car (205 mi16/weber TBs/omex 500) mapped. But the warmup table hasn't been altered and is still like the base map. Are these correct values, i think my exhaust smells a lot of fuel on a cold start?

 

% 104 97 87 76 53 48 41 33 21 9 2 0 0 0

Coolant (celcius) -17 -8 1 10 19 28 37 46 55 64 73 82 91 100

 

Cheers, Johnny

[[L'e$kro] 2]

Hi,

 

Just a quick question...

I had my car (205 mi16/weber TBs/omex 500) mapped. But the warmup table hasn't been altered and is still like the base map. Are these correct values, i think my exhaust smells a lot of fuel on a cold start?

 

% 104 97 87 76 53 48 41 33 21 9 2 0 0 0

Coolant (celcius) -17 -8 1 10 19 28 37 46 55 64 73 82 91 100

 

Cheers, Johnny

 

 

Check coolant temp before startup, then shave some % off the corresponding value until car starts hardly, then back off a bit.

 

for example if engine temp is 19deg lower the "53%" value to 40% or 30% and see if still starts and idles.

 

Repeat process at different starting temperatures from winter-cold temp until engine-already-a-bit-warm temp. You can then smooth out the curve a little if the Omex has a 2d graph rendering. It will save a on fuel bills...

Nico

Edited June 21, 2011 by [L'e$kro]

[sideways danny 0]

this is mine. It's on a clio but should be very similar