vickiw106 1 Posted April 21, 2011 (edited) just managed to purchase a mbe 967 ecu. i am going to run a 1.6 8 v engine running Honda throttle bodies. i know the map on the ecu is for a 1.4 16 v vauxhall engine so therefore wont run my engine, does anyone how or where i can get a base map to start and run the engine before a remap? i also have to build or obtain a wiring loose, does anyone have any suggestions on where to obtain good common sense wiring diagram, plugs etc. thanks Ian Edited April 21, 2011 by vickiw106 Share this post Link to post Share on other sites
SPGTi 2 Posted April 23, 2011 SBD Motorsport are the main distributors and stockists for these. Have a look on their website. I know they can do pretty good maps for Vauxhall engines with just the spec you are running. A few 106's are rallying using this ecu. Good luck Steve Share this post Link to post Share on other sites
Sandy 189 Posted May 11, 2011 Good luck indeed, make sure you get in touch with someone who can really, genuinely, do a good job with MBE, it's a tricky system to get right and few do. Share this post Link to post Share on other sites
