benny205mi16 19 1 Cars Posted February 16, 2011 Hello, My car already had an after market air filter on it when I purchased it, but this sets at the rear of the engine above the exhaust manifold, which is not ideal. So I am looking to return it to standard, Can anyone tell me if the standard 1.6 and 1.9 systems are the same? Thank you Share this post Link to post Share on other sites
lemmingzappa 75 1 Cars Posted February 16, 2011 I'm 99% sure they're the same bar the AFM. Share this post Link to post Share on other sites
Anthony 1,003 Posted February 16, 2011 As above - exactly the same other than the AFM itself. With a proper K&N adapter, you can relocate the air filter to behind the passenger headlight where it won't be sucking in hot air off the exhaust manifold - another option for you if you can't source a complete standard air intake setup, or would rather keep the engine bay less cluttered. Share this post Link to post Share on other sites
benny205mi16 19 1 Cars Posted February 16, 2011 Ok, thank you. That would be ok, I could just use my AFM. There is a 1.6 setup I am looking, but mine is a 1.9 Thank you Share this post Link to post Share on other sites
benny205mi16 19 1 Cars Posted February 16, 2011 I did look at putting it behind the headlight, but mine has PAS and this seams to be in the way for doing this. Thanks Share this post Link to post Share on other sites
Anthony 1,003 Posted February 16, 2011 I did look at putting it behind the headlight, but mine has PAS and this seams to be in the way for doing this. There's a relocation bracket for cars with PAS that moves the fluid reservoir next to the battery Not the best picture in the world and doesn't show the bracket itself, but you can see where the PAS reservoir goes. Share this post Link to post Share on other sites
benny205mi16 19 1 Cars Posted February 17, 2011 Hello, That would be ideal, Is the bracket from a shop or did you make it your self? Thank you Share this post Link to post Share on other sites
Anthony 1,003 Posted February 17, 2011 That would be ideal,Is the bracket from a shop or did you make it your self? It came with the K&N kits for PAS equiped 205's, but it would be very easy to make something up yourself that would do the job - it just goes between one of the mounting holes on the PAS reservoir to one of the holes on the battery tray, and a thin strip of steel or alloy bent to shape with a hole at either end would be fine. Share this post Link to post Share on other sites