NNPUT 2 Posted February 14, 2011 Hi, i am just about to start a major overhaul of a 1.9Gti and i was wondering what the approximate overall cost of a MI16 conversion is? I had an engine a couple of years ago and had to sell it for various reasons. If you could give me some idea of costs for items such as inlet manifold, dizzy adaptor, exhaust manifold, engine mounts etc I would be grateful. Cheers Mark Share this post Link to post Share on other sites
Simes 248 2 Cars Posted February 14, 2011 (edited) £1500+ if you do it properly. Buy an engine with the inlet - strip and rebuild the engine. 4-2-1 Manifold Mi16 gearbox Loom AFM Time. Use the Mi16 loom and ECU - don't bother with the 8v ignition set up ie. dizzy adaptor. Have a look around the forum - this topic comes up a lot. Edited February 14, 2011 by Simes Share this post Link to post Share on other sites
Baz 421 Posted February 14, 2011 Yep i'd agree with that, £1500-2k if you're doing it properly anyway! Unless you're lucky and can find an already rebuilt & proven engine/converted loom & ecu etc etc. (Which i have for sale as it happens!) Share this post Link to post Share on other sites
Miles 331 1 Cars Posted February 15, 2011 + worth remembering that 99% of engine with the electronics will be worn out so factor in new parts here or aftermarket stuff, It's a good 20 years old now. Share this post Link to post Share on other sites
NNPUT 2 Posted February 15, 2011 Yep i'd agree with that, £1500-2k if you're doing it properly anyway! Unless you're lucky and can find an already rebuilt & proven engine/converted loom & ecu etc etc. (Which i have for sale as it happens!) Hi Baz, thanks for the reply. I'm sitting down, how much are you after for the engine and loom etc? Cheers Mark Share this post Link to post Share on other sites