106 Beam Bearings The Same As 205 Ones?

[pugpete1108 62 1 Cars]

i gotta rebuild the wifes quicksilver beam as when i tried lowering it i must have dislodged the bearings as its now crunching and knocking something rotten.

 

i read that they are the same as the 205 ones? is this correct. james told me they sit on/in the trailing arms as opposed to in the tube. but was just wondering if by chance they were the same.

 

cheers

[welshpug 1,655]

no but I have read that one of the 205 ones does fit if the spacer is narrowed.

[pugpete1108 62 1 Cars]

spacer????

 

hmmmmmm

[Daviewonder 533 3 Cars]

spacer????

 

Plastic tube that sits between both bearings in the trailing arm.

[james_pug 26 1 Cars]

Come over tomorrow Pete I've got a spare kit for a 106 and a kit for a 205 well see how differnt they are and I'll show you a 106 beam

[allanallen 528 2 Cars]

IIRC 106 bearings are the same as 205 outers. The 205 bearings have more needles/bearings in them though.

 

You can fit 4 bearings inside 106 trailing arms if you remove the spacer....... Which is nice!

 

Be prepared for at least one of the shafts to be f***ed though. There's a company in Leicester that will press you new shafts in while you wait for £70 a side if needs be.

 

I f***in hate 106/saxo beams!!!!

[Daviewonder 533 3 Cars]

IIRC 106 bearings are the same as 205 outers. The 205 bearings have more needles/bearings in them though.

 

You can fit 4 bearings inside 106 trailing arms if you remove the spacer....... Which is nice!

 

Be prepared for at least one of the shafts to be f***ed though. There's a company in Leicester that will press you new shafts in while you wait for £70 a side if needs be.

 

I f***in hate 106/saxo beams!!!!

 

 

Can you buy new shafts or do they need to be machined from scratch?

[welshpug 1,655]

not from peugeot or citroen, but there are a few places that do make replacements.

[pugpete1108 62 1 Cars]

Come over tomorrow Pete I've got a spare kit for a 106 and a kit for a 205 well see how differnt they are and I'll show you a 106 beam

 

will do mate. text me what time youre gonna be about as i gotta fit a cooker for the outlaws at some point.

 

i know what spacer you all mean now. i saw it in the pics of a beam rebuild kit.

 

i sure a s hell wont be replacing the shafts though, jesus its only a 106