smokey 0 Posted October 14, 2010 Hiya guys I was wondering if you could help me? I'm struggling to find the part number for the bolts to fix the gearbox to the engine. I recently bought these 6923 81 as this was the only part i could find on service box. But these only fitted on 3 of the places. I seem to need a bolt with a nut on the end and a smaller bolt. Also do these bolts screw in the starter motor as well? Thanks Share this post Link to post Share on other sites
smithy 1 Posted October 14, 2010 Hiya guys I was wondering if you could help me? I'm struggling to find the part number for the bolts to fix the gearbox to the engine. I recently bought these 6923 81 as this was the only part i could find on service box. But these only fitted on 3 of the places. I seem to need a bolt with a nut on the end and a smaller bolt. Also do these bolts screw in the starter motor as well? Thanks the gearbox bolts you have are probably the top 2 and the front one,the one round the back by driveshaft i think is a shouldered 10mm with 13mm head if memory serves me correctly.can you not just go to a local supplier to get one? the starter motor bolts are 10mm with 8mm allen key head one is slightly longer than the others. Share this post Link to post Share on other sites
welshpug 1,737 Posted October 14, 2010 6923 81 SELF-TAP SCREWS M10 X 1.50 - 75 these fit in 3 of the 4 locations, the 4th being an allen key head from the block side, it has a square washer. 6913 K3 SCREW DIAM 10X1.50-70 2221 26 STOP PLATE 17 X 17 I think these are the starter motor bolts; 6913 D0 SOCKET SCREW DIAM 10X150-60 6913 56 SOCKET SCREW 10X150-65 Share this post Link to post Share on other sites
Miles 331 1 Cars Posted October 14, 2010 These are the same as any XU>BE engine, so 306's, 406's to name a few so any scrappy will have them Share this post Link to post Share on other sites
smokey 0 Posted October 16, 2010 Thanks guys I managed to get the allen key bolt and the starter motor bolts from a 205 diesel at a breakers. I decided on taking the starter motor too as it was a long slim one (but still a Mitsubishi one) This came off a 1.9 205 Diesel. This morning i checked the number of teeth and my old fat starter motor had 9 teeth and the new slimmer diesel one i got yesterday has 10. So surely this wont work on my Mi16 engine? Or will it still crank with the extra tooth? Thanks Share this post Link to post Share on other sites