gerallt_p 0 Posted September 28, 2010 Seem to remeber reading somewhere that somebody drilled the center of their 1.6 GTI alloys (the solid ones) to enable easier balancing of them? I've done a search but cant seem to find more info about doing it, anyone done it on here? Im sure it was on here I saw it!!!! Thinking of doing mine as im pretty sure i knocked a weight off on a rally last weekend. Thanks Gerallt Share this post Link to post Share on other sites
welshpug 1,737 Posted September 28, 2010 I have seen that done on Rallycross cars, though I never asked how they did it, some looked like they did just use a holesaw! Would imagine it to be easy enough to turn out the centres as there is a ridge on the face, bolt them to a spare hub flange and clamp the flange into a lathe and away you go. Share this post Link to post Share on other sites
boombang 2 Posted September 29, 2010 I just take them to the local tyre place - they bolt them onto the machine and balance. Sure that most place have the facility to do it, they just too lazy to put the other attachment on. Share this post Link to post Share on other sites
cRaig 281 1 Cars Posted September 29, 2010 A couple of tyre places have made a small fuss about the GTi alloys on my old 106, or the alloys on the 406 without centre caps. They just dont like wasting time swapping the attachment on the balancing machine, but now I try and order the tyres/agree a price before mentioning the alloys lol. Share this post Link to post Share on other sites