Miles 331 1 Cars Posted August 11, 2010 Just looking for some info on how to connect the wires from the Siren to main Alarm box 4 way conector as the sticker on it is wrong with the 4 colours over lapping each other and the main alarm box wires being black doesn;t help much either Any help would be great Share this post Link to post Share on other sites
dee205 3 Posted August 11, 2010 I have the instalation documents on my other pc if that's any use to you let me know. Share this post Link to post Share on other sites
Anthony 1,003 Posted August 11, 2010 I've got the Toad Ai606 installers installation document that I can email you if you need it Miles - just let me know your email address It's not particularly helpful with regards this point, but from what I can make out, the alarm module side of the 4-pin plug should be wired as follows... Pin 1 - #1 Black (to alarm module) Pin 2 - #7 Black (to alarm module) Pin 3 - #10 Black (+12v) Pin 4 - #9 Black (Ground) Share this post Link to post Share on other sites
Miles 331 1 Cars Posted August 11, 2010 Thats the info I have on the install manual, the leads from the Siren are all colours, Blue, Red, Brown and Yellow I think and the plug has a sticker around it telling you which pins to plug them into, But the stickers wrong and the yellow covers 2 pins and without pulling the pins out too often it's not worth trying a lucky guess. Share this post Link to post Share on other sites