Emerald Tacho Converter

[All Praise The GTI 3]

as above got one today but i dont know which wire to join it to for the clocks???

also is the 12v need to be ignition switched live i guess?

need to sort this today really please chaps

thanks

nat

[pugpete1108 62 1 Cars]

i guess its the same as the diode convertor thingy i made?? then i do beleive its the big greeny blue one wire 112 ? should have two wires going into one.

 

i may be wrong though

[All Praise The GTI 3]

thanks mate il go try it now ...

[pugpete1108 62 1 Cars]

just thought mine's a ph1 though. dont know if the wire colour changed later on?

 

checked the haynes and it's still 112. one goes to the coil and one goes to the ecu from the tacho

 

will need an earth and a switched live too

 

does it run off the two drivers on the coil pack ?

Edited August 11, 2010 by pugpete1108

[welshpug 1,627]

http://forum.205gtidrivers.com/index.php?s...st&p=718324

[All Praise The GTI 3]

was a grey then blue wire. all working perfect

thanks

[pugpete1108 62 1 Cars]

yay i actually helped solve a problem. my years on here have paid off