Mi16 Into 205 Loom Question

[Pug Monkey 0]

Hi there

I am putting my Mi16 enging into the 205 and at the moment I am sorting through the looms. All is going well with the info I have found for the installation.

 

What I am trying to find out is - The Mi16 loom has two multi pin plucgs at the end of the loom that terminated under the headlight of the Mi16. Do I leave these in the loom? Do I need them? I have unwound thes and found that some of the gauges terminat here but a little unsure about the rest.

 

[welshpug 1,629]

I'd remove the two round plugs and fit the 205's brown plugs in place of them.

[Pug Monkey 0]

I'd remove the two round plugs and fit the 205's brown plugs in place of them.

 

I have got absolutely no idea what you mean? I never said anything about round plugs

[welshpug 1,629]

The Mi16 loom has two multi pin plucgs at the end of the loom that terminated under the headlight of the Mi16

 

 

I have got absolutely no idea what you mean? I never said anything about round plugs

 

 

that's what threw me, as the Mi16 I did was a 2.0 and had round plugs, the 1.9 must not have round ones then

[Miles 331 1 Cars]

Ditch all of that (the 1.9 Mi's use plug's like the 205) and use new wires routed the same as the 205 loom, All these link looms etc really are a bodge, You can even buy the corect crimp's that fit the 205 plug's too, The part number I believe is on the site somewhere