EdCherry 34 1 Cars Posted April 30, 2010 Well im not to up on my wheel fitment's but know this are ford/peugeot 4x108 PCD but offsets is what I need help on. 1.6 GTi front hubs and rear beam, these are the wheels I want to run. 2 - 13 X 5.5 ET 17.5 2 - 13 X 5.5 ET 37.5 Will I need spacers, and if so what size? Share this post Link to post Share on other sites
Henry Yorke 270 3 Cars Posted April 30, 2010 The ET17.5s will fit. They will be better suited to 1.9 hubs, but will OK on 1.6 hubs. Probably about the same width as fitting 1.9 wheels onto 1.6 hubs. Other ones you are looking at 15mm to get to standard 1.6 width to maybe even 20mm spacers to fill the rear arch. Maybe a few more mm on both to get them to fully fill the arches. Standard 1.6 wheels are 5.5x14 ET 24 Share this post Link to post Share on other sites