rescue dude 0 Posted April 13, 2010 I need to replace the metal coolant pipe, the one that joins the two rubber pipes that sits in front of the bottom pulley. I've seen someone selling ally one's somewhere but i'm buggered if I can find the ad. Any idea's where I can get one? Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted April 13, 2010 I've always just used the standard plated steel pipe in that location. But if you desperately want an alloy one I could make you one. Share this post Link to post Share on other sites
rescue dude 0 Posted April 13, 2010 I've always just used the standard plated steel pipe in that location. But if you desperately want an alloy one I could make you one. Not desperate for an ally one just that i've seen somewhere selling them. Any idea of the part number of the oe one? That's if they are still available? Share this post Link to post Share on other sites
rescue dude 0 Posted April 13, 2010 (edited) Ah found it. 130778. I think. Edited April 13, 2010 by rescue dude Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted April 13, 2010 They are certainly still available, slightly cheaper to buy from your local dealer and not ebay as the ebay merchants just tack a few quid on to the dealer price. However if you don't mind paying a couple of quid for the convenience of it landing on your doorstep in a few days time you could just get one from ebay. Such as this one- http://cgi.ebay.co.uk/PEUGEOT-205-GTI-309-...=item335c1e0e14 Share this post Link to post Share on other sites
rescue dude 0 Posted April 13, 2010 Main stealer price was £14 plus vat so pretty much the same as e-gay but at least I know it's an oe part. Thank's for your help. Still wondering where I saw those ally one's? Share this post Link to post Share on other sites
ORB 227 1 Cars Posted April 13, 2010 I got lucky with one from my main dealer, they still had one on the shelf and as it was dead stock I got it for a quid. This was only last month! I got a few other bits too! Full price is about 12 quid plus the VAT I think. Share this post Link to post Share on other sites
harryskid 193 Posted April 13, 2010 Any reason not to make one out of copper, any body know? Share this post Link to post Share on other sites
roote 0 Posted April 13, 2010 if you used a copper pipe will it upset the positive ions in the water with the alloy and cause corrosion, ive read it on the ause site about copper head gasket's or is just if it is in contact with the block ? Share this post Link to post Share on other sites
tagy 4 Posted April 13, 2010 You can get this pipe from GSF also, about the same price I think. Share this post Link to post Share on other sites
harryskid 193 Posted April 13, 2010 if you used a copper pipe will it upset the positive ions in the water with the alloy and cause corrosion, ive read it on the ause site about copper head gasket's or is just if it is in contact with the block ? Bit like the reaction between copper and galv or lead then! Share this post Link to post Share on other sites
sport1901966 8 Posted April 14, 2010 For galvanic corrosion the metals have to be in 'intimate' contact , hence the issues with copper gaskets needing to be removed after a short period . Copper pipe should be fine, I think a lot of guys have used them for t-pieces in their coolant system. Share this post Link to post Share on other sites
tri_longer 25 Posted April 14, 2010 I fitted a new standard one 2 years ago but decided to give it a few coats of etch primer and matt black to try and reduce the effects of external corrosion and so far seems to be holding up ok. Share this post Link to post Share on other sites
notamondayfan 44 Posted April 14, 2010 Didn't somebody use a metal pipe from a vacume cleaner hose to good effect, or am I getting confused? Share this post Link to post Share on other sites
tri_longer 25 Posted April 14, 2010 Thinking about it, on the orange car we ditched the metal pipe and just used one length of flexi silicone hose and just held it away from the fan belt with a couple of cable ties. Share this post Link to post Share on other sites
rescue dude 0 Posted April 14, 2010 Wonder if you could use a lenght of plastic drain pipe? The grey stuff that's got a wall thickness of about 3mm? Share this post Link to post Share on other sites
tri_longer 25 Posted April 14, 2010 You could put in a bucket with some boiling water to see what happens. I'd think the big issue would be stopping the clamps slipping of the end of the pipe. Share this post Link to post Share on other sites
notamondayfan 44 Posted April 14, 2010 plastic may also crack and split quite easy, especially if hit with stones from the road. Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted April 14, 2010 I'll be honest- why re-invent the wheel? I'll happily spend £14 every 15 years to replace that pipe when it needs it, with something that will fit straight on with no bother! Share this post Link to post Share on other sites
wildejon 7 Posted April 14, 2010 Same here, I'm entirely confused by this thread Share this post Link to post Share on other sites
welshpug 1,737 Posted April 14, 2010 what tom said, GSF was about £9.60 when I bought one a while ago. Share this post Link to post Share on other sites
HERMAN 33 Posted April 20, 2010 I got a mate to knock me one up out of stainless. Just got to offer it up and then he will tig me some lugs on it to mount it. Share this post Link to post Share on other sites