Rallyvan 0 Posted March 17, 2010 Anyone know where I can get a number plate that will fit in the recess on the front bumper? Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted March 17, 2010 Just buy a standard one and trim about 10mm off each end, then it will fit. This is what I did anyway. Share this post Link to post Share on other sites
Rallyvan 0 Posted March 17, 2010 Just buy a standard one and trim about 10mm off each end, then it will fit. This is what I did anyway. Cheers Tom, do you know if the one's that you stick on the bonnet are legal? Share this post Link to post Share on other sites
rescue dude 0 Posted March 17, 2010 Cheers Tom, do you know if the one's that you stick on the bonnet are legal? I've used a stick on plate on my Pug for a few years without any problem. Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted March 17, 2010 I've also had the stick on type on another 205 and not had any bother. But I positioned it as low as possible on the leading edge of the bonnet. Share this post Link to post Share on other sites
Rallyvan 0 Posted March 17, 2010 Cheers for the reply lads, av just been and bought one and cut it down so that it fit in thr recess, very happy with it. £15 for one number plate, the last time I bought one am sure they were bout a fiver! Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted March 17, 2010 Buy them off ebay, and they are a fiver! Share this post Link to post Share on other sites
welshpug 1,737 Posted March 17, 2010 £7.50 at my local motorfactors Share this post Link to post Share on other sites
