grantley1988 1 Posted February 25, 2010 Is there a tool i can use for removing tyres? i have a set a speedlines that i want to refurb and might aswell go the whole hog on them! Any ideas? Thanks Share this post Link to post Share on other sites
Tom Fenton 1,650 Posted February 25, 2010 Find a local non-chain tyre fitters and ask them to take them off the rims for you. Share this post Link to post Share on other sites
Bigtimmy 1 Posted February 25, 2010 Alternatively try and contact my mate Bacon from the removing car radios thread, but as mentioned he is sometimes difficult to get hold of, often for 6 months at a time....strange that. I'll agree with Tom though, if you can't get hold of Bacon then your best bet is an independant garage with a tyre machine, my local one does everything from small trailer wheels up to tractor tyres and you'll find that they can be quite reasonable on price. If you do go in and have the tyres removed ask how much for the four then make sure that price includes refitting them as well...most garages won't and they'll try and fleece you out of your hard earned cash that would be better spent on food and warmth...and beer of course! Share this post Link to post Share on other sites
mr_exe 1 Posted February 25, 2010 Like already has been suggested, pop into a tyre place, and ask if they will do it in return for a contribution to the tea mashing and biscuit fund. Share this post Link to post Share on other sites
Mongo 0 Posted February 25, 2010 Like already has been suggested, pop into a tyre place, and ask if they will do it in return for a contribution to the tea mashing and biscuit fund. Kwik fit are often good at this, if you get someone decent on, tehy`ll give it to the apprentice boy and you can bung him a fiver. I do my own bike tyres, and ahve a bead breaker and tyre levers, i wouldnt bother to do this method on car tyres, its a pain in the arse having to do 2, let alone 4. Share this post Link to post Share on other sites
toddydal 1 Posted February 25, 2010 i once cut one off with a cutting dics on a grinder but i wouldnt recomend it,there was hot rubber and bits of metal flying every wher but i got it off in the end Share this post Link to post Share on other sites
omega 82 Posted February 25, 2010 jack up car with trolley jack put tyre under car use car jack on car and place on tyre remove trolley jack jack up car on tyre repeat until the bead pops Share this post Link to post Share on other sites
jackherer 543 Posted February 26, 2010 I've used the jack and car method in the past with higher profile tyres but I couldn't make it work with 195/50s Share this post Link to post Share on other sites