Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
24seven

Injector Cleaning

Recommended Posts

EdCherry

Isnt there something to do with Mi16 throttles wearing or something? not to big on my 16v XU's :$

Share this post


Link to post
Share on other sites
24seven

I think the theottle bodies themselves are generally getting worn out these days, as well as the air flow meters, but the 2 I have seem to be ok for the time being.

Share this post


Link to post
Share on other sites
luggy

Hi Guy

Did you get the injectors cleaned? did it make any difference?.

 

Been preping my MI for its MOT and it has a misfire and seems to be running on 3 cyliders, when it warms up it does improve and clears between 2.5-3K revs.

 

Found out that some of the injectors are leaking so when the engine is started theres too much fuel to burn, 2 ways I get around it

1. Remove plugs and remove the fuel relay (green one) and turn the engine over for about 5-10 seconds, replace fuel relay and plugs.

2. Just remove the fuel relay, if the car starts then you know you've got leaking injectors.

 

I prefer method 1 as engine oil pressure is established with no compression resistance but takes a little longer.

Method 2 is OK if your in a rush but runs like a bag of nails on the cylinders that the injectors leak. :lol:

Share this post


Link to post
Share on other sites
Sign in to follow this  

×