Andy F 0 Posted December 9, 2009 Hi people This is probably a silly question but today i thought as everything is plumbed in i may as well fill the header with coolant. I have bought one of the new clear phase 2 style tanks, but it has no max/min lines. Not sure if its like the phase 1 where the level indicator was in the cap. Whih is not very usful either as peugeot dont make them anymore so im using a stant one. Im guessing its around 2" from the top? Also i noticed there is a small hose underneith the tank i take this is just an overflow? Thanks Andy Share this post Link to post Share on other sites
allye 530 3 Cars Posted December 9, 2009 Is doesn't matter that much tbh. Not sure about xu engines but on TU's it only takes collant from it when it needs to, so as long as there is some in there its fine! Share this post Link to post Share on other sites
Masekwm 2 Posted December 9, 2009 (edited) Hi Andy, I asked the same question a few months back, the answer was along the lines of you can't overfil it as it'll throw it out the breather pipe. edit see here - http://forum.205gtidrivers.com/index.php?s...=108870&hl= Keith Edited December 9, 2009 by Masekwm Share this post Link to post Share on other sites
pug_ham 245 3 Cars Posted December 9, 2009 The phase 1/1.5 tank has a red level marker inside the neck of the expansion tank but 2" from the top sounds about right. Where is the small hose underneath the tank or do you mean underneath the cap on the new one? If you do thats the overflow pipe. Graham. Share this post Link to post Share on other sites
Andy F 0 Posted December 10, 2009 Spot on, thanks for the help Share this post Link to post Share on other sites
