Jez G 6 1 Cars Posted October 25, 2009 I am sure this must have been asked loads of time but I counldn't get the search to give me anything useful. Is there a guide to fitting the water and oil breather pipes in the engine bay? My car has been in bits for 6 months and now I am struggling to remember how it all goes back together I seem to have a mixture of phase one and phase two parts but am trying to re-fit my now rebuilt phase one engine. It was a later enging that came out (I think) and things seem to be different? Any help would be much appreciated. Thanks Jez Share this post Link to post Share on other sites
j_turnell 137 3 Cars Posted October 25, 2009 Best off taking a picture of the bits your not sure of, theres only really a couple of differences between the years, so its pretty straight forward. Share this post Link to post Share on other sites
DrSarty 113 1 Cars Posted October 25, 2009 (edited) Agreed with J, that pictures speak a 1,007 words. If you start to use this resource though (MiamiStu's On-Line Part Catalogue), you'll find some very useful exploded diagrams like these: Oil Vapour/Breather Pipework Some Coolant Pipework and Some More Coolant Pipework. I hope that helps, as honestly, there's sliced bread and there's that cool ^^ resource. Edited October 25, 2009 by DrSarty Share this post Link to post Share on other sites
Jez G 6 1 Cars Posted October 25, 2009 I did try the seach several times.... All I got each time was 57 pages of unread posts since the last time I was on. Anyway thanks this is perfect. Jez Share this post Link to post Share on other sites
DrSarty 113 1 Cars Posted October 25, 2009 For once, no-one, not even me suggested 'searching'. Don't forget to read what's written Jez eh? The above is a separate web-site link to help you. Share this post Link to post Share on other sites
