Ms2 Trigger Settings For Xu-engine?

[sub205 5]

can someone tell me the right trigger settings for the xu-engines with an ms2 cpu?

 

currently i got the following, dont know whether its right.

 

[welshpug 1,626]

I think the trigger angle of tooth 1 before TDC is closer to 117 degrees, but I'm sure Sandy can confirm that.

[Mad Professor 7]

If you are using the sensor in the top of the gearbox then you want "Tooth #1 Angle (deg BTDC): 114".

 

All of the other settings you have there should get you going.

[sub205 5]

If you are using the sensor in the top of the gearbox then you want "Tooth #1 Angle (deg BTDC): 114".

 

All of the other settings you have there should get you going.

thanks a lot.