aCe 0 Posted August 5, 2009 Right just bought a complete Saftey Devices C44 roll cage, i have so far put in the rear section and mounted to the rear beam and b pillar pillar legs. I'm now trying to fit the front but am having difficulties with where it goes around/into(?) the dash area and the a pillar. I don't know wether i have to remove the dash completly or what please please help Share this post Link to post Share on other sites
James_R 3 Posted August 5, 2009 Easier to remove the dash then cut out behind the vents and refit. Share this post Link to post Share on other sites
aCe 0 Posted August 5, 2009 What parts do i need to cut out behind the dash? Any pictures wouldd be great! Share this post Link to post Share on other sites
James_R 3 Posted August 5, 2009 I'll try and get some, but mines just got the ends cut off to fit it, then some plate to pop the ends back on Share this post Link to post Share on other sites
daveyboyblack 1 Posted August 6, 2009 Here's mine: I had this installed by the guys up at www.abmotorsport.co.uk so it might be worth a quick call to them. We've had to remove the glovebox but apart from that i'm not actually sure what's disappeared. I'd be happy to take some more specific photo's if you need any. Dave Share this post Link to post Share on other sites
aCe 0 Posted August 6, 2009 Cheers Dave thats very helpful, your only down the road so i may call on you when i attempt it this sat Share this post Link to post Share on other sites
