engine killer 5 Posted July 26, 2009 I am planning to lower the radiator but there is another radiator for the air-conditioning system sitting between the fans' cowling and coolant radiator. Also, there is an a/c compressor underneath the coolant radiator. What I am fussing about is I cannot simply lower both radiators because of the a/c compressor. Ditch the original fans and cowling, move both radiators forward, and install pull type fans at the back seems the solution. So I need to find out what the airflow rate (CFM) of the original fan is, has anyone got any idea? Thanks. Share this post Link to post Share on other sites
Cameron 16 Posted July 26, 2009 I don't know the original flow rate, but a Pacet 11" or 13" one should do the job just fine. Share this post Link to post Share on other sites
engine killer 5 Posted July 26, 2009 (edited) I don't know the original flow rate, but a Pacet 11" or 13" one should do the job just fine. Cheers mate Hope it won't be too critical, because we already have to use twin Fans in Hong Kong due to the weather/temperature. But Still, I don't mind to have the figure for comparison at all. Edited July 26, 2009 by engine killer Share this post Link to post Share on other sites
James_R 3 Posted July 26, 2009 I've got a single 11" spal jobby I think it's spec'd at about 1100CFM or something it's certainly enough :s Share this post Link to post Share on other sites
