Rear Brake Setup

[JayCC 0]

Hey,

 

After finally fitting my rebuilt rear beam, im having a little trouble remembering where certain brackets go at the rear.

 

 

Here are some photo's i took, can anyone take a quick photo of their's so i can use it as a guide? Also what is the little bracket (on the brick in the photo) for? I have one for both sides but cant remember where i removed them from. I think they had something to do with the handbrake cable.

[JayCC 0]

and a quick shot of the ride height back to standard

[jord294 95]

 

 

as you can see, the top bracket connects to where the top bolt goes to hold disc protector on, and the bracket on the brick is where the handbrake is held up. it's fastened on with the bolt that holds the end plates of the a.r.b

 

tried phoning you a couple of times

 

are you happy with the ride height, or does it need to come down a touch?

Edited June 13, 2009 by jord294

[JayCC 0]

Thanks Andy, all sorted now your pic helped alot

[welshpug 1,678]

Jay, any idea what damper boltentres distance you set the torsion bars to for a standard looking ride height?

 

Never put a beam together for a standard height on a 205 so I dont actually know how low my car is sitting at the moment!

Edited June 14, 2009 by welshpug

[JayCC 0]

Welshpug, Andy (Jord294) rebuilt my beam, i'm sure he will post the info you need. However i remember this thread which may have the info you need?