Which Rallye Steels Are Widest?

[Guest Alex_cmyk]

As title.

[johnnyboy666 195 1 Cars]

s2 106 are 6j i think, 205 are something around 5j i think

[Guest Alex_cmyk]

s2 106 are 6j i think, 205 are something around 5j i think

Would 106 fit under standard arches?

[johnnyboy666 195 1 Cars]

i should think so, people have done it, they just might be slightly borderline at mot time as theyre supposed to be inside the arches. having said that my wheels stick out about 1.5 inches either side and i havent been pulled over or anything for it, although i havent had an mot since its been like it. you can get rallye arches relatively cheaply on ebay

[Guest Alex_cmyk]

i should think so, people have done it, they just might be slightly borderline at mot time as theyre supposed to be inside the arches. having said that my wheels stick out about 1.5 inches either side and i havent been pulled over or anything for it, although i havent had an mot since its been like it. you can get rallye arches relatively cheaply on ebay

Ya I was planning to put GTi arches on. Just been offered a set of S1 Rallye steels (106) are these the same as 205?

[jonnygoodhand 0]

Ya I was planning to put GTi arches on. Just been offered a set of S1 Rallye steels (106) are these the same as 205?

 

No. 205 Rallye Steels are 13".

[Guest Alex_cmyk]

No. 205 Rallye Steels are 13".

oh really... i'll go for the 106 steels then

[DaveW 6]

6'' fit fine with 185/55

Edited June 10, 2009 by DaveW

[johnnyboy666 195 1 Cars]

phase1 106 rallye steels are 13s arent they?

[Fox 3]

phase1 106 rallye steels are 13s arent they?

 

No, but they are only 5 1/2 inch wide.

[Guest Alex_cmyk]

No, but they are only 5 1/2 inch wide.

not THAT much different to s2 then

[Guest Alex_cmyk]

Which size for tyres are recommended for 14" wheels?

 

And also which would fit best s1 or s2 106 wheels? I'm reckoning s1 would be easiest as they're narrower...

[welshpug 1,622]

I'd go for S2 wheels and use 185 60 14 on a 205

[pug_ham 240 3 Cars]

I'd go for S2 wheels and use 185 60 14 on a 205

Thats the size I used on mine, S2 6 x 14 106 Rallye steelies.

 

They fitted fine on an STDT which has the GTI arches / shell even when I lowered it about 30mm.

 

Graham.

[Jrod 7]

On a base model shell I'd stick with 185/55

[Guest Alex_cmyk]

Mines's base model but I'll be putting GTi arches on it soon. It's lowered 40mm at the front, I thinka bout 20mm the rear but will be evening it out

[jonnygoodhand 0]

I ran S1s with 185/60s on a base model shell, lowered around 30mm, with no issues at all.