What Car Is This Hose Off?!

[JimLad 1]

Need to replace it and want to make sure I get the right one.

 

It's the fill from the bottom of the black (later style?) header tank to a connection at the back of the block.

 

Is it just off any 205 Gti or do I need one of a specific version?

 

Cheers

 

Edit: forgot so put an arrow on it; it's the one with the over braiding stuff on it.

Edited May 26, 2009 by JimLad

[Anthony 1,003]

A standard 205/309 hose will fit fine, although the one that's on there isn't standard (assuming the braid hasn't been added later) and isn't quite routed as standard either (normally it's clipped against the bulkhead underneath the heater matrix hose that you can also see in that picture)

[JimLad 1]

It was clipped against the bulk head but that brought the lower end too close to the exhaust manifold, hence why I now need to replace it!

 

Cheers

[welshpug 1,680]

I have vague recollection of a 405 using a hose like that if it is original braiding, as mentioned the original 205 hose will fit fine.

Edited May 26, 2009 by welshpug

[pug309twin40s 1]

that hose is fitted to 405 Mi16's. not sure on other model 405's.