tezza 0 Posted April 27, 2009 (edited) excuse the dumb question the bit thats circled in the picture. It was just laying there wheres it connect? Edited April 27, 2009 by pugtorque Share this post Link to post Share on other sites
ade 4wd 11 Posted April 27, 2009 That brake pipe should connect to the master cylinder (it goes to the rear brakes). It is next to the hole it should screw into but it looks like there is a union already screwed in there and the brake pipe cut off. Share this post Link to post Share on other sites
tezza 0 Posted April 27, 2009 thanks mate, so does that mean i need a new end of just remove the silver union and put that pipe in? bit confused Share this post Link to post Share on other sites
Simes 248 2 Cars Posted April 27, 2009 seeing your other post too this might also help you out Share this post Link to post Share on other sites
tezza 0 Posted April 28, 2009 thanks simes only just saw someone replied to this. but the picture is a lifesaver. many thanks Share this post Link to post Share on other sites