Mark205 1 Posted February 20, 2009 Hi guys, How do i go about removing the gear stick surround, (the one that contains the coin tray and cd cubby hole), i have undo most screws and it feels loose but i just cant get it out. Their must be a screw or two still holding it on somewhere. Any help would be appreciated. Cheers Share this post Link to post Share on other sites
BusEngineer 7 Posted February 20, 2009 If you remove your stereo and the cage its sitting in there will be two nuts below, 10mm head iirc The by lifting the end up between the seats, assuming you've removed the nut from there too it should lift out, it drags on the carpet a little so needs a little force but it will come out Share this post Link to post Share on other sites
Mark205 1 Posted February 21, 2009 Cheers, i managed to do it, never saw the 2 little bolts holding it on. Share this post Link to post Share on other sites
Mark205 1 Posted February 21, 2009 Do you know how to take the whole gear linkage assembly off. Ive undo all the bolts surrounding the gear stick and it seems to pull up, but then stops. I havent got access to a ramp so getting under the car is a little risky. Cheers Share this post Link to post Share on other sites
BusEngineer 7 Posted February 21, 2009 You will need to disconnect the gear linkage ball joints underneath the car if you jack the car up on one side and put it on axles stands you should be able to see it, and you'll be perfectly safe Share this post Link to post Share on other sites
Mark205 1 Posted February 21, 2009 Cheers, i managed to do it whilst waiting for a reply. Share this post Link to post Share on other sites