SPGTi 2 Posted February 2, 2009 What is missing from here ? cheers Steve Share this post Link to post Share on other sites
snooks 5 Posted February 2, 2009 Throttle Position Sensor I think... Share this post Link to post Share on other sites
Anthony 1,000 Posted February 2, 2009 MAP sensor IIRC TPS is on the other side of the throttle body... Share this post Link to post Share on other sites
snooks 5 Posted February 2, 2009 It had to be one of the two... Share this post Link to post Share on other sites
welshpug 1,626 Posted February 2, 2009 yep, Map sensor Share this post Link to post Share on other sites
SPGTi 2 Posted February 2, 2009 MAP sensor IIRC Is there a part number as I cannot find it on service box. cheers Steve Share this post Link to post Share on other sites
Super Josh 4 Posted February 2, 2009 Be aware thet there are two different types, depends on if the loom/ECU is from an early or late car. Josh Share this post Link to post Share on other sites
welshpug 1,626 Posted February 2, 2009 (edited) as Josh mentioned, check which plug you have, earlier engines/looms had a normal 3 pin JPT plug, later ones had a 3 pin magneti superseal plug. 1920 9H SENSOR BOSCH - INJECTION XU10J4RS UNTIL RPO No. 08056 77.83 GBP 1920 AN - INJECTION XU10J4RS SINCE RPO No. 08057 31.53 GBP Edited February 2, 2009 by welshpug Share this post Link to post Share on other sites
SPGTi 2 Posted February 2, 2009 Thanks, I have one in my box of bits. I wondered what it was for, never thought about trying it in that hole. I will be using DTA so will probably just use it to bung the hole up. thanks Steve Share this post Link to post Share on other sites
welshpug 1,626 Posted February 2, 2009 depends if the DTA system you're using wants a MAP signal or not. Share this post Link to post Share on other sites
