Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
werf

[car_upgrade] 205 Gti Goes To Mi16 Rally Car

Recommended Posts

werf

In August 2008, I bought a Peugeot 205 GTI 1.6 ‘87. The machine costs $ 2500, it was too big price for it, but in Russia are very few 205's, therefore, did not have to choose. Here's how it looked after the purchase:

 

2974953378_a5669c03ee.jpg

 

2974086633_2f06c9874b.jpg

 

2974946098_f834440a32.jpg

 

2974928396_133c18929b.jpg

 

2974092327_5608009cfc.jpg

 

2974088763_52ec20408e.jpg

 

I had planned to install the engine Mi16 and prepare the car to participate in the rally. I decided to do everything themselves, not of saving money, but to get the pleasure of creation and to acquire new skills. This is my first experience in the construction of the car, I hope it will be successful.
B)

Share this post


Link to post
Share on other sites
maturin23

Welcome onboard the board Werf. B)

 

Looks like a proper project - what condition are the inner wings in and the boot floor?

 

Do you have access to new parts (trim etc) via Peugeot in Russia?

Share this post


Link to post
Share on other sites
werf

In November 2008, I found a motor Mi16 with wiring, injectors, gearbox, starter and the flow meter of the Peugeot 405. It was a model XU9J4Z (DFW) 147 hp. This set cost me $ 625.

 

3202866545_ceb8f43cc0.jpg

 

3203716108_54e2a06850.jpg

 

3217671520_5a988d8fc3.jpg

 

On the Forum fans Peugeot 205 (Kiev, Ukraine), I found and bought a 4 disc from 1.6 GTI, they are similar to those that were on the T16, so I plan to use them, despite a small radius of 14 inches.

 
3227755381_3a7fc84d0a.jpg

Share this post


Link to post
Share on other sites
werf
Welcome onboard the board Werf. B)

 

Looks like a proper project - what condition are the inner wings in and the boot floor?

 

Do you have access to new parts (trim etc) via Peugeot in Russia?

 

Thanks, Maturin!

Wings and loading docks in a satisfactory condition, but there is a rust through in the lower corners of the rear doors, on the border of the wings and the threshold - it is 3-5 cm diameter hole. Also, there is a rust through on splasher on the front right wheel which is in the salon. The car was hit in the right front, while the repair was replaced a longeron, it is the place of welding that need attention. Photos of rusty places I'll show later.

Yes, in Russia, it is possible to easily order new parts for the Peugeot 205.

Edited by werf

Share this post


Link to post
Share on other sites
werf

In December 2008, I began to strip the body, to restore it. I removed the engine of the car. It took me only two days, but have stretched to two weeks - I visited Tamagotchi only on Saturdays. The engine I remove their own, without the use of lifts. Here's how I did:

1. Old tires are put under the engine, put boards on top of them.

2. Removed from the car the front suspension.

3. Put the car engine on a stand of tires and planks.

4. Unscrew the three fixing the engine.

5. Lift the front of the car.

6. Removed the engine from the vehicle.

I tentatively unscrew underframe, but it turned out, that could do without this, engine is easily removed from the bottom.

 

3203716654_a834cce2e4.jpg

 

3203707492_4e45bccb69.jpg

 

3203712756_d04833b602.jpg

 

Sorry, but photos of the retrieval engine are missing, there was no free hand to take pictures.
B)

Share this post


Link to post
Share on other sites
DrSarty

Blimey! A Russian. :o HOW COOL!!!

 

Welcome to the forum.

 

That phase I looks like it needs a lot of work, but it's in safe hands.

 

Your English is outstanding, especially saying 'loading dock' instead of boot. You talk proper. :lol:

 

I've always wanted to go to Russia................ B)

 

If you're thinking of refurbishing the Mi engine before installation, you could install the D6C pistons to get 10.4:1 and another 13bhp or so. I think that's the only requirement, unless the ECU is different?

 

We're always glad to help if we can. In fact could you post a link to the 205 GTI forum/website in Russia so I can have a nose please at what you guys get up to?

 

Good luck, and we're all watching.

 

Damn it! That sounds like we're spying. Damn...I said 'spy'!!! :lol:

Edited by DrSarty

Share this post


Link to post
Share on other sites
werf
Blimey! A Russian. :o HOW COOL!!!

 

Welcome to the forum.

 

That phase I looks like it needs a lot of work, but it's in safe hands.

 

Your English is outstanding, especially saying 'loading dock' instead of boot. You talk proper. ^_^

 

I've always wanted to go to Russia................ :lol:

 

If you're thinking of refurbishing the Mi engine before installation, you could install the D6C pistons to get 10.4:1 and another 13bhp or so. I think that's the only requirement, unless the ECU is different?

 

We're always glad to help if we can. In fact could you post a link to the 205 GTI forum/website in Russia so I can have a nose please at what you guys get up to?

 

Good luck, and we're all watching.

 

Damn it! That sounds like we're spying. Damn...I said 'spy'!!! :lol:

 

Thank you, DrSarty!

 

Yes, I am Russian, and my English is at a high level, I am sorry, very high!
<_<

 

Works a lot. And I have a lot of questions. I hope I can find support in the face of the participants of the forum to answer questions.

 

And you add another question to the existing. D6C. This is a 160 hp. Is it enough simply to install pistons of the engine? My ECU - Motronic 1.3 with a catalyst.

 

Piston of D6C worth $ 2000. And find some used in Russia is difficult.

 

You said a spy? I must inform about a group of spies in the KGB!
:ph34r::lol:

Share this post


Link to post
Share on other sites
BERTMAN
In December 2008, I began to strip the body, to restore it. I removed the engine of the car. It took me only two days, but have stretched to two weeks - I visited Tamagotchi only on Saturdays. The engine I remove their own, without the use of lifts. Here's how I did:

1. Old tires are put under the engine, put boards on top of them.

2. Removed from the car the front suspension.

3. Put the car engine on a stand of tires and planks.

4. Unscrew the three fixing the engine.

5. Lift the front of the car.

6. Removed the engine from the vehicle.

 

haha, same way i removed the engine form my XS
<_<

 

good luck with the project fella!

Share this post


Link to post
Share on other sites
cybernck

great work! you've got to admire people doing such work in countries where it's difficult

and expensive finding cars and parts. i know that very well, living in such country :lol:<_<.

 

you can get a set of good used D6C pistons cheaply from the UK, instead of new ones.

 

search the forum for petert camshafts and ECU chips for some ideas too :ph34r:.

Share this post


Link to post
Share on other sites
Sergio205

Werf!

My dear friend!

I am so happy to see you on the pages of this so deeply respected excellnt english speaking forum!!!!

Why don't yuo speak Ukranian when posting your "restoration in progress" photos on Ukranian forum???!!!!

 

Seriously speaking - I am impressed with the level of your enthusiasm and dedication to your project.

 

If I can help you somehow here in Russia - you are welcome!

 

Sergio205 and my Pug205 Junior

Share this post


Link to post
Share on other sites
werf

 

Two weeks ago, I removed all the wiring of the cabin, withdrew heater and dashboard. I do not know that I will do when it will be necessary to install wiring back.
;)

 

3224791983_9de93d7409.jpg

 

3225653446_382df52d2f.jpg

 

3224927429_5487798972.jpg

Hello, my dear friends!
:D

3224960985_629147903e.jpg

 

3224972365_1e53536204.jpg

 

3224996539_eaf9c37b0f.jpg

 

3225862912_711f9682f8.jpg

 

3225023031_5531a08333.jpg

 

3225040791_69c53f685d.jpg

 

3225909192_b208ce30ff.jpg

 

I have a question. Can I replace the heater is something that is less? Probably not even the radiator itself, but the fan, which gives the air outside.

Share this post


Link to post
Share on other sites
werf
great work! you've got to admire people doing such work in countries where it's difficult

and expensive finding cars and parts. i know that very well, living in such country :lol:;) .

 

you can get a set of good used D6C pistons cheaply from the UK, instead of new ones.

 

search the forum for petert camshafts and ECU chips for some ideas too :D .

 

Thank you, cybernck!

 

Overcome the difficulty is very interesting! The feeling of having a rare car, I can not describe! In Russia, the unique Peugeot 205 is very great! Everyone knows about the Peugeot, everybody wants it, and I do have one!
:D

 

I will try to search the forum, I hope there will be drug dealers who will be able to send details to Moscow.
:D

 

 

 

 

Werf!

My dear friend!

I am so happy to see you on the pages of this so deeply respected excellnt english speaking forum!!!!

Why don't yuo speak Ukranian when posting your "restoration in progress" photos on Ukranian forum???!!!!

 

Seriously speaking - I am impressed with the level of your enthusiasm and dedication to your project.

 

If I can help you somehow here in Russia - you are welcome!

 

Sergio205 and my Pug205 Junior

 

Damn, You're the same from Moscow!

 

My English is not allowing me to understand what you meant to mention the Ukrainian forum!

You are involved in this forum?

 

I hope we will be able to communicate in Moscow!

 

Share this post


Link to post
Share on other sites
werf

 

Removed all the wiring from engine bay. Removed the brake cylinder and pedal unit, the expansion tanks, mounting, cables, and a lot of dirt.

3235440255_d172a57e46.jpg

Before.

3236296376_158d83d1bf.jpg

After.

Help me pull the windshield. How to remove the seal? Is it possible to use it again or it will be necessary to purchase new one?

Share this post


Link to post
Share on other sites
werf
yes, there are electric window demister and interior heaters available, do a search on Google ;) .

 

p.s. http://projects.205gtidrivers.com/b1ack_mi...sembly/CIMG0245 :);)

 

Yes, I like this project. It even inspired me to change the color of my car. First, I wanted to paint the car white, but eventually abandoned that idea and decided to paint red outside and black inside. But now I want to make it white inside, white seems to be much more fun.
:)

 

Share this post


Link to post
Share on other sites
Sergio205
Help me pull the windshield. How to remove the seal? Is it possible to use it again or it will be necessary to purchase new one?

 

 

Werf!

The window seal is removable and reusable. I didn't take the windshield out myself but when I swapped mine in Moscow I didn't buy a new seal. The service men used the old one. The only guess I have is that may be it is hard (even impossible) to take the windshield out in good shape and save the seal. You either have to sacrifice a seal (cheap loss) or windshield (expensive loss). But it is only a guess.

If you dial me I'll explain in word how I reinstall quarter windows.

If you haven't recognize me yet - i am Sergey and we met a couple of times in Moscow.

Good progress with your project so far.

Sergio205

Share this post


Link to post
Share on other sites
werf

 

Removing the carpet in the cabin, I found a coin. Coin of '87, the same age red Tamagotchi!

 
3225983426_785f3c824d.jpg

 

No progress in the work, just wanted to share the find with you.
:D

Share this post


Link to post
Share on other sites
hexhamstu

this project is great!

Share this post


Link to post
Share on other sites
werf

 

Yesterday I bought a Peugeot 405 Mi16'87. The machine cost me 800$. It is the engine XU9J4 (D6C) + gearbox Be1. Now I have two engines: DFW and D6C.

 
3381030627_0a45d977e6.jpg

 

3381851202_f60c0d7430.jpg

 

3381032825_757b5fca9f.jpg

 

3381035329_1a812c7e21.jpg

 

3381037249_de94840373.jpg

 

Share this post


Link to post
Share on other sites
DrSarty

Oh why oh why do I love 205s & Mi16s so much?

 

This and Ifcho's project (he's in Bulgaria) are definitely my favourites on here. Relatively basic conditions & hard to source components, but heaps and heaps of enthusiasm. This to me is the spirit of 205 owners; never say die!

 

Isn't there something different about the Mi engine in a 4x4? I seem to remember that from somewhere.

 

Keep up the good work Werf.

Share this post


Link to post
Share on other sites
werf
Isn't there something different about the Mi engine in a 4x4? I seem to remember that from somewhere.

 

Keep up the good work Werf.

 

This is not a 4x4, this is just a plate!

 

Thank you, DrSarty! =)

Share this post


Link to post
Share on other sites
werf

 

This process is not relevant to my Tamagochi ... This machine will become a donor and donating his engine for a child. I just want to show you how the stripping the car and complained that the strip 405 is much harder than the 205!

 
3388826745_d20dfac9e5.jpg

 

3388827829_fecf118be3.jpg

 

3389639382_7037c53a10.jpg

 

3388831189_c0aee336f1.jpg

 

3389642854_40dd58fea8.jpg

 

3389644790_e0eba299d3.jpg

 

3389640102_b49ecb543d.jpg

Monstro!
:rolleyes:

 

Share this post


Link to post
Share on other sites
DrSarty
Monstro! :rolleyes:

 

That's exactly what I was thinking. :lol:

Share this post


Link to post
Share on other sites
werf

 

Peugeot 405 Mi16 was pulled and cut in half!

Is there a difference in gear ratios between the gearboxes of the Mi16 - Be1 and Be3? Be1 - 87 ', Be3 - 91'.

I have both and I can not decide which one to use. I plan to take a box of Mi16 and replace it the first and fifth gears of the gearbox Be1 from 1.6 GTI

 
3409221894_7b4ae8f99b.jpg

 

3408414089_990174ec56.jpg

 

3409224150_ecab9e80fd.jpg

 

Monstro beheaded!
:wacko:

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×