dk73 1 Posted January 24, 2009 has any one used this method to get dents out? heat the area using a hairdryer for 2 mins, with the co2 spray around the dent then into the dent for 30 secs. (THE CAN MUST BE UPSIDE DOWN). leave until the ice is evaporated then wipe, the dent will be gone or not as bad. if its still there but not as bad repeat process. it wont harm the paintwork at all. great for flat panels ie wings, doors, boot etc. Share this post Link to post Share on other sites
chrisj21 2 Posted January 24, 2009 Should this not be in Body, interior & ICE section? Share this post Link to post Share on other sites
Gentrix 2 1 Cars Posted January 24, 2009 I once tried it, but wasn´t that impressed with the results - maybe the dent was to sharp. Could work well on easy ones. andi Share this post Link to post Share on other sites
dk73 1 Posted January 24, 2009 its better for the dents that dont have a crease in. Share this post Link to post Share on other sites
maturin23 10 Posted January 24, 2009 Have you actually tried this out? I've seen the videos on Youtube, but also seen loads of comments saying it basically doesn't work. Be interested if you've got actual experience of making this happen. Share this post Link to post Share on other sites
dk73 1 Posted January 24, 2009 yeh i've got experience of it, im a professional valeter and also dent removal specialist. its worked for me in most cases. Share this post Link to post Share on other sites
pug_ham 242 3 Cars Posted January 24, 2009 Topic moved into correct section. Please have a read of this topic with regards to posting your topics. Did you neot read the pm I sent you yesterday after you posted your engien wanted add? Graham. Share this post Link to post Share on other sites
dk73 1 Posted January 24, 2009 hi,im a new member,sorry trying to get used to it,can you tell me how i can get into the wanted section as ive trid and need to post 30 posts outside 72 hours,i still need to look for an engine,regards. Share this post Link to post Share on other sites
omega 82 Posted January 24, 2009 has any one used this method to get dents out?heat the area using a hairdryer for 2 mins, with the co2 spray around the dent then into the dent for 30 secs. (THE CAN MUST BE UPSIDE DOWN). leave until the ice is evaporated then wipe, the dent will be gone or not as bad. if its still there but not as bad repeat process. it wont harm the paintwork at all. great for flat panels ie wings, doors, boot etc. how do you buy co2 apart from a fire extinguisher Share this post Link to post Share on other sites
dk73 1 Posted January 24, 2009 ok,go to your local plumbers merchant they have it,its about 12 quid,hope that helps.its called freeze spray[co2 or called carbon diaoxide]. Share this post Link to post Share on other sites
pug_ham 242 3 Cars Posted January 24, 2009 can you tell me how i can get into the wanted section as ive trid and need to post 30 posts outside 72 hours. By making 30 posts but that doesn't include knowingly breaking the forum rules by posting your wanted topic in a section before you have made the 30 posts. Your original topic is in the wanted section because I moved it there yesterday after you posted it inthe question, comments & suggestion section. Graham. Share this post Link to post Share on other sites
dk73 1 Posted January 24, 2009 ok,thanks i wont do it again.... Share this post Link to post Share on other sites