So im currently rebuilding my 205 gti 1.9 XU engine but in comparison to other rebuilds ive done there seems to be a massive lack of technical information in the manual. Theres no information for camshaft bearing clearance. The manual just states to visually inspect the journals and caps.... no runout specs, endfloat or anything. Same goes for valves it doesnt state what the valve guides should be or their wear limits, doesnt state the valve stem wear limits either. Just says if you can wiggle them too much then replace them. How much is too much i need numbers !
I hope this will help.
Dimensions are in [mm], inlaat = intake, uitlaat = exhaust, nominaal = nominal, 1e reparatie = 1st oversize, 2e reparatie = 2nd oversize.