Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
porter_bmx

Brake Lines Inside The Car

Recommended Posts

porter_bmx

hi, i'm currently running the brake lines through my car and im not sure if i just use a standard male fitting into the t peice?? can any one help?? pictures would be great thanks

steve

Share this post


Link to post
Share on other sites
mrswampy

Yes use m10 male fittings

 

just make sure the seat base are the same on both fittings

Share this post


Link to post
Share on other sites
porter_bmx

inside the t peice is what looks like a counter sink, the fittings are flat on the bottem.

Share this post


Link to post
Share on other sites
marksorrento205

The inside of the t -piece should have a concave face which as you said is like a countersunk. You will need a convex fitting to seat with the concave face of the t - piece. Its a male - female scenario. Male being convex, female being concave. The pics below should help.

 

Rally design sell a load of different fittings

 

Rally design - brake pipe fittings

 

Convex seat

 

RD1503.jpg

 

Concave seat

 

RD1506.jpg

 

HTH's :P

Edited by marksorrento205

Share this post


Link to post
Share on other sites
porter_bmx

cheers its all plumbed in now :o

Share this post


Link to post
Share on other sites
Sign in to follow this  

×