Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
djinuk

Tappet Setting

Recommended Posts

djinuk

what should i set the tappets to on my 205 1.4 xs. I was told 8 and 10 on a stone cold engine but i cannot remember which was exhaust and which was inlet.

Share this post


Link to post
Share on other sites
trogboy

if you set them to 8mm and 10mm the valves would never open :unsure:

 

I usually use 0.2mm inlet and 0.35mm exhaust (from memory)

 

I think someone was talking about 0.20mm for both but I'm not sure that wasn't an XU engine discussion.

Share this post


Link to post
Share on other sites
Jrod

0.15-0.25 for inlet 0.35-0.45 exhaust from memory.

 

Will confirm later.

Share this post


Link to post
Share on other sites
Enfield

Done mine the other day at 0.25 inlet and 0.35 exhaust

Share this post


Link to post
Share on other sites
Sign in to follow this  

×