Having overhauled gearbox, fitted new wheel bearings (SKF) , discs etc while stripped down as they have been on a while.   Felt handling was different so checked front front geometry and front camber on both sides has gone more negative. Car has adjustable top mounts so can adjust it out but concerned that something is wrong with the new bearings or there was something wrong with the old bearings when fitted by a garage sometime ago. Never felt anything wrong before   Pressed in bearings in the hubs and big circlips fitted OK. Pressed in hubs OK. Checked fit on driveshaft on bench and seemed OK. Driveshafts torqued up OK   Cant quite explain it to myself why this has happened other than normal tolerances.   Anyone any thoughts?