Heater blower resistor. 1.6 gti. 1989

[Steve205 14 1 Cars]

Good afternoon all. 

My heater blower stopped working last week. Checked blower itself by connecting 12 volt directly.  It was fine. Cleaned it up a bit and replaced.  

Took out resistor and it looked worse for wear. Put it back in and still no joy. Then it worked a few days later all by itself.

It runs intermittently now.

It works on external air settings but not on Internal air. 

Have checked for replacement Resistor in all local scrap yards, nothing available. 

Checked on line and at Factors. 

Nothing available.  

Does anyone have any idea where I could get one?

Oe part number 6445.91.

Thanks.

Stephen 

[Gaz D 5]

If you’re on Facebook mate try Thomas enzo whelan or Steve heath on the 205 groups. I’m sure they’ll have one between them

[Gaz D 5]

Classic-Peugeot-spares on eBay mate

[SRDT 146]

You got a 5 pin one not the usual 4 pin, if you can't find one you could probably try to replace the rusty transistor with a MJ11015 just like on the 4 pin units.

[Steve205 14 1 Cars]

Thanks for replies. 

 

You're right SRDT it's a 5 pin one on my car. There seems to be a few 4 pin options available.  

I have had no joy with a 5 pin.

I think Peugeot threw all the odd parts into my particular 205..... ;-)

Might get an auto-electrician to have a look. May be able to work around the problem. 

 

Stephen